Announcement

Current PromoNewsAffiliates Promo None Photobucket The New Promo Is ShadowRayquaza! Enjoy! I'm Also Looking For More Staff, Please Email Me(Soul Seeker) For Information About It!

Adverts

Adverts

#1 07-05-18 02:06:58

zhebaby0721
Noob
Registered: 23-04-18
Posts: 20
Pounds: 60
Bank: 0

China Sports Gloves

There are two ways to wear
One is the glue worn on the palm, play a role in non-slip
One is the glue worn on the back of the hand, play a decorative, beautiful effect
Comfortable style comfortable and lovely
durable and warm
the choice of gloves can be considered factors
Degree of exposure
If the contact with chemicals longer, it will significantly reduce its chemical resistance. Increasing the concentration of chemicals, or dipping the glove directly into the chemicals, will cause the glove to penetrate for a time shorter than the manufacturer provides.
2. Temperature
In general, the temperature increases, penetration speed, penetration time is shortened. The standard penetration time data is obtained at room temperature (20-25 ° C). Gloves that are used above this temperature will have significantly reduced chemical resistance.
3. Glove thickness
If necessary, choose a thicker glove or wear 2 gloves at the same time because thicker material provides better chemical resistance and significantly increases penetration time. Most importantly, the thickness of the glove material doubles and the penetration time can be extended by 4 times. When considering the thickness of gloves, but also consider the work itself needs the flexibility and touch. Thicker gloves have a stronger chemical resistance, but at the expense of their grip, hand touch and safety at the cost. There is a good balance between feel, flexibility and moderate chemical resistance. Disposable gloves, in particular, have excellent feel but are generally only used to protect milder chemical substances, have poor protective properties against many chemicals, or have no protective properties at all.
4. Surface treatment and lining
Glove surface treatment and lining are not the same, there are smooth surface, rough surface, embossed surface and so on, the lining, with cotton, fabric, etc., as well as linerless gloves. A textured, rough surface with better slip resistance for safe handling of wet, smooth objects. Cotton lining, cotton lining with good sweat-absorbing properties, fabric lining gloves also have good high temperature performance, and unlined gloves with good flexibility and touch.
5. Chemical mixture
Permeation experiments are performed with pure substances. Chemical mixtures can significantly change the penetration rate and physical properties of a given glove material. In general, for chemical compounds, a material that has good impermeability to each of the ingredients should be chosen. However, it is also possible that the mixture will have a longer penetration time than the single ingredient. Users can use the conditions of the gloves to protect the ability of the mixture to make some comments, especially the toxicity of the mixture.
6. Physical properties
The physical properties of gloves and in the use of the anti-piercing, tear resistance, wear resistance and tensile strength. Chemicals penetrate through pierced holes or torn gaps, exposing them to more chemicals than chemicals through the molecular layer, exposing them to more harmful chemicals. Sometimes need to wear two different kinds of gloves, one for mechanical damage, one for chemical damage prevention.
Gloves in the use of precautions
The appropriate choice of gloves or not, the use of the right or not, are directly related to the health of the hand, so small to remind the selection and use of the process should pay attention to the following points:
1. The choice of gloves to have adequate protection;
2 before use, especially disposable gloves, to check whether there is a small hole in the glove or damaged, abraded areas, especially finger joints;
3. Do not use the contaminated gloves to be arbitrarily dropped;
4. Remove the gloves must pay attention to the correct method to prevent the gloves of contaminated material contact with the skin and clothing, resulting in secondary pollution;
5. Do not share gloves, gloves are likely to cause cross-infection;
6. Before wearing gloves, you should wash your hands promptly, remove the gloves and wash it thoroughly, then wipe the hand cream to replenish the natural protective grease.
7. Before wearing gloves to cure or cover the wound, to prevent bacteria and chemicals into the blood;
8. Do not ignore any skin erythema or itching, dermatitis and other skin diseases, if the hand appears dry, itchy, bubbles, etc., should promptly consult a doctor.
High temperature resistant material
(1) Novoloid, a new high-tech synthetic fiber that is non-melting, flame resistant and temperature resistant, resistant to temperatures up to 1100 ° C, soft and comfortable, and resistant to many chemical attacks, even after repeated washes Its high temperature performance.
(2) Kevlar - is a widely used aromatic synthetic fiber, not only cut resistant, but also high temperature damage.
(3) Aluminized material - radiant heat resistant to higher temperatures.
(4) leather - if kept dry, has good low temperature resistance, while its non-melting, non-burning features make it often used to make welding gloves.
(5) Cotton - a natural material that protects against high and low temperatures. However, due to meet the protection requirements, gloves made thicker, flexibility is not good enough.
when the color number to provide guests, we have to dye.
China Sports Gloves
website:http://www.zj-jinchang.com/gloves/sports-gloves/

Offline

 

07-05-18 02:06:58

AdBot
Advertisements

Adverts

Board footer

Powered by FluxBB
Hosted by PunBB-Hosting